Emtek L-Square Straight Knurled Lever

How to Order Emtek Geneva Lever Handle with Square Rosette

Emtek’s Geneva lever handles with Square rosettes are easy to order. Just select from the options in the pull down menu to customize the finish and fit. Emtek’s Square hardware collection of door hardware provides the contemporary look you’re after for your decor. Be sure to order your Emtek Deadbolts in coordinating styles and finishes.

Rosette Options. The Emtek Geneva lever handle is available with several rosette options so you can create a custom look for your home.(what is a rosette?)

Handing. When ordering lever handles or handlesets, we’ll need to know the handing of your door. Door handing is the direction in which your door swings. If you order the incorrect door handing you will either have locks on the wrong side of the door, levers that are upside down, or levers that point in the wrong direction and keep the door from closing properly. How to determine lever handing.

Finishes. Emtek offers the freedom to coordinate hardware finishes to match your entire home. High quality finishes that are resistant to weather and handling ensure that your hardware will look great for many years to come.
*some finishes, oil rubbed bronze and patinas, are intended to wear with use and age. Because they are intended to wear with age, some finishes have limited or no warranty.

Emtek Geneva lever handle with Square Rosette Specifications

– Complete set. Includes Levers and backplates/rosettes for both sides of the door, latch and strike plate and mounting hardware.
– Shipped with Mortised tubular latch (drive-in latches are available upon request)
– Standard door preparation
– Shipped with square corner mortise plates and strike plate. Rounded corner available upon request.
– Backset must be specified upon order placement. Choose between standard 2 3/8″ or 2 3/4″ backsets.
– Installation instructions included in packaging.

CF Mechanism. You can upgrade the Emtek Geneva Lever Handles with Square Rosette by choosing the Emtek CF Mechanism. CF Mechanism features concealed fasteners and limited rotation latch. Emtek Geneva Lever with CF upgrade.

Whats Included in Your Emtek Geneva Lever Handle

Passage Door Lever Contents
A Lever for both sides of the door, latch mechanism, strike plates and mounting screws.

Privacy Door Lever Contents
A Lever for both sides of the door, latch mechanism, generic unlocking tool, strike plates and mounting screws.

Double Dummy Lever Handles
Two non functioning levers and mounting screws for surface mounting.

Note: Emtek door hardware is shipped standard with square corner strike and faceplates. Rounded corner strike and faceplates are available upon request. Drive in latches also available upon request.

Emtek Geneva Lever Handle Functions

Emtek Lever Handles are available in several functions. Please review the descriptions below so you can order the correct door lever for your application.

	Emtek Passage or Hall and Closet Lever Handles are used on doors that do not require a locking mechanism. Halls, closets, pantry or laundry doors will generally use a passage leverset. Passage levers do not have a locking mechanism.
	Emtek Privacy or Bed and Bath Door Levers are most often used on Bedrooms, Baths or Office doors where a lock for privacy while occupied is desired, but a keyed lock is not really necessary. Emtek privacy levers have a push button on the rosette or backplate as shown to the left to activate the lock. On the outside, there is a pin hole for emergency unlocking. Some levers will have a pin hole inside a circular piece, some just have a small pinhole.
	Emtek Double Dummy Door Levers are sold in pairs. Dummy levers do not have a latch or mechanism of any kind. These levers are surface mounted to a door that has not been bored (large hole cut out) for a lever. Dummy leverss are generally used on double doors that us a ball catch at the top to keep them closed so a latch is not required. They are also commonly found on the inactive side of a french door – a single dummy mounted on either side of the inactive door.
Emtek Keyed Levers	Not all Emtek knob and levers are available in a keyed function. For your exterior doors you may consider and Emtek passage knob or lever used with an Emtek deadbolt above, or and Emtek Sideplate Lock which incorporates the lever and deadbolt with one larger decorative backplate.

Emtek covers it’s door hardware with a 5 yr finish and mechanical warranty. Living finishes are not covered under this warranty as they are designed to change over time. For more information see Emtek Door Hardware Warranty.

Emtek products are assembled per order so when they are returned the doorknobs have to be taken apart and restocked. As a result, there is a 25% restock fee on all Emtek products. If items are returned that have been installed, used or abused there may be a higher restock fee assessed or no credit issued. If you need to return an item, please repack the door hardware in it’s original packaging to assure that it arrives undamaged. For more return information see our Direct Door Hardware Returns Page. Before returning any Emtek Door Hardware, please contact us for a return authorization number.

Height: 2 1/2″ (63.50mm)
Width: 2 1/2″ (63.50mm)
Clearance: 1″(25.40mm)

Projection: 2 1/8″ (53.98mm)
Rosette Thickness: 3/8″ (9.53mm)